All Air Scourers supplied by Certikin have only one moving part; a carefully balanced rotating impeller. There is no contact between the impeller and the housing thus eliminating abrasion and wear. The unit is completely oil free and the suction and discharge ports have built-in silencers that reduce noise levels to a minimum.
Features:
• All units are manufactured in die-cast aluminium alloy
• Standard motors are two pole, totally enclosed air cooled, and continuous duty rated
• IP54 protection rated
• Insulation class F
• Max temperature 40°C
• Special voltages available on request
Accessories available upon request
• Inlet filters
• Cartridge suction filter
• Silencers
• Pressure relief valve
Air scourer sizing is based on a scouring rate of 60m3/m2/hr at a pressure of 0.2 bar.
The installation of a pressure relief valve is recommended to safeguard the air blower.
Features:
• All units are manufactured in die-cast aluminium alloy
• Standard motors are two pole, totally enclosed air cooled, and continuous duty rated
• IP54 protection rated
• Insulation class F
• Max temperature 40°C
• Special voltages available on request
Accessories available upon request
• Inlet filters
• Cartridge suction filter
• Silencers
• Pressure relief valve
Air scourer sizing is based on a scouring rate of 60m3/m2/hr at a pressure of 0.2 bar.
The installation of a pressure relief valve is recommended to safeguard the air blower.